3D CAD model created to document an existing folding table frame
for a refurbishment project. The original unit had no existing
documentation, so the frame assembly was measured, modeled in
CAD to capture its construction, hardware, folding mechanism,
bracket locations.
Tangent Manufacturing: Custom Aircraft Interior Décor Fabrication
Custom refreshment center designed for an Agusta A109 helicopter. The project
focused on creating a compact service unit that fit between the passenger seats.
The finished unit combined upholstered side panels with a wood veneer center
section, integrating cup holders, storage drawers, and a hinged upper
compartment for beverage service within the limited cabin space.
Professional Aircraft Inc. - refreshment center
Professional Aircraft Inc. - folding table CAD modeling
Production drawing created after customer approval of the concept
rendering. The drawing translated the approved refreshment center
design into a buildable unit for fabrication and installation in the aircraft.
Initial customer presentation rendering developed to show the
proposed refreshment center design before fabrication.
Edese Doret Industrial Design- rub strip CAD modeling and
detail drawing
Engineering drawing and bill of materials developed from the 3D
CAD model to document the existing folding table frame for
approval and refurbishment. T he drawing package created the
missing technical documentation needed to review, approve, and
support the refurbishment of the existing folding table unit.
Created 3D CAD models of decorative ornament details for a private
jet interior, translating supplied reference images and artwork into
usable geometry for fabrication.
Edese Doret Industrial Design - decorative ornament CAD modeling
Through Tangent Manufacturing, my aircraft interior décor
fabrication company, I worked with aircraft interior designers to
produce highly custom items that could not be sourced as standard
products. The designers provided the design direction, and my role
was to help translate those custom concepts into buildable parts
through CAD modeling, detail drawings, material and construction
review, fabrication coordination, and sourcing specialty fabricators
All items had to be produced with aircraft interior requirements in
mind, including applicable FAA Federal Aviation Regulations (FAR)
material and safety requirements.
Jet Wall
Produced high-gloss decorative wall panels for a private aircraft
interior based on the aircraft interior designer’s direction. Made from
clear sheet material with a reverse-painted finish, the panels created a
glossy, dimensional surface.
Resin cast clear wash bowl
Three Kings Lamp
Illuminated decorative mirror
Actual cabinetry set up in the staging area, ready for installation in
the aircraft.
3D CAD model created to document an existing
folding table frame for a refurbishment project.
The original unit had no existing documentation,
so the frame assembly was measured, modeled in
CAD to capture its construction, hardware, folding
mechanism, bracket locations.
Tangent Manufacturing: Custom Aircraft Interior
Décor Fabrication
Custom refreshment center designed for an
Agusta A109 helicopter. The project focused on
creating a compact service unit that fit between
the passenger seats. The finished unit combined
upholstered side panels with a wood veneer
center section, integrating cup holders, storage
drawers, and a hinged upper compartment for
beverage service within the limited cabin space.
Professional Aircraft Inc. - refreshment center
Professional Aircraft - folding table CAD modeling
Production drawing created after customer
approval of the concept rendering. The drawing
translated the approved refreshment center
design into a buildable unit for fabrication and
installation in the aircraft.
Initial customer presentation rendering developed
to show the proposed refreshment center design
before fabrication.
Edese Doret Industrial Design- rub strip CAD
modeling and detail drawing
Engineering drawing and bill of materials
developed from the 3D CAD model to document
the existing folding table frame for approval and
refurbishment. The BOM identifies the individual
components, materials, quantities, and hardware
required. Together, the drawing package created
the missing technical documentation needed to
review, approve, and support the refurbishment
of the existing folding table unit.
Created 3D CAD models of decorative ornament
details for a private jet interior, translating
supplied reference images and artwork into
usable geometry for fabrication.
Edese Doret Industrial Design - decorative
ornament CAD modeling
Through Tangent Manufacturing, my aircraft
interior décor fabrication company, I worked with
aircraft interior designers to produce highly
custom items that could not be sourced as
standard products. The designers provided the
design direction, and my role was to help
translate those custom concepts into buildable
parts through CAD modeling, detail drawings,
material and construction review, fabrication
coordination, and sourcing specialty fabricators
All items had to be produced with aircraft interior
requirements in mind, including applicable FAA
Federal Aviation Regulations (FAR) material and
safety requirements.
Jet Wall
Produced high-gloss decorative wall panels for a
private aircraft interior based on the aircraft
interior designer’s direction. Made from clear
sheet material with a reverse-painted finish, the
panels created a glossy, dimensional surface.
Resin cast clear wash bowl
Three kings lamp
Illuminated decorative mirror
